Back to Blog
How-to Guides 2026-11-15 Sustainable Yoga Mats, Yoga Equipment 0 views

How Much Bolster Filling Does Your Yoga Bolster Need?

How Much Bolster Filling Does Your Yoga Bolster Need?

Work out how much loose filling a bolster needs by starting light, testing firmness, and topping up in stages. A practical refill method with honest limits.

Why there is no single number

Bolster covers vary in length, width and how tightly they are sewn, and personal firmness preferences vary just as much. That is why a fixed gram figure for every bolster would be misleading. The reliable approach is to refill in stages, check how the bolster feels under your body, and stop when it supports you without feeling overstuffed.

The supplied filling comes in 500 g and 1 Kg packs, so you can choose a starting quantity and keep a spare pack for topping up later. The method below uses those pack sizes as practical units rather than pretending there is one universal answer.

A staged method for refilling your bolster

Work on a clean, dry surface and have your empty cover ready. The aim is to add filling gradually so you can judge firmness before the cover is full.

  1. Start with one 500 g pack: Open the cover fully and add the first pack loosely and evenly. Do not compress it yet. This gives you a baseline to feel how much volume that weight creates in your particular cover.
  2. Distribute and check the shape: Push the filling toward the ends and corners so the bolster takes its natural shape. A bolster that is lumpy at this stage will usually stay lumpy, so smooth it out before adding more.
  3. Test firmness with your body: Close the cover and lie or sit on the bolster as you would in practice. It should feel supportive but not rock-hard. If you sink through it, you need more filling. If you perch on top and it feels rigid, you have added too much.
  4. Top up in small amounts: If the bolster feels soft, add filling from a second pack in handfuls rather than emptying the whole pack at once. Recheck after each addition. The difference between supportive and overstuffed can be surprisingly small.
  5. Settle and recheck after a day: Loose filling settles with use. After a day or two of practice, open the cover and add a little more if the bolster has softened. This is normal and is why keeping a spare pack is useful.

How the 500 g and 1 Kg packs fit this method

The 500 g pack is a sensible starting unit for a standard bolster because it lets you add filling without committing to a full kilogram. The 1 Kg pack suits larger bolsters or a full refill where you already know your preferred firmness. If you are unsure, buy the 500 g pack first and treat the 1 Kg pack as a top-up option rather than the default.

There is no supplied instruction that says a particular bolster size requires a particular weight, so use the pack sizes as convenient measures, not as manufacturer recommendations.

What the filling is made of

  • Bolster Filling: The filling is organic spelt husk grown in the UK. Spelt husk is a natural loose fill, so it will settle and compress over time. That is why the staged method includes a recheck after a day or two rather than assuming one fill is final.
    Bolster Filling
    Bolster Filling
  • Bolster Filling: The filling is available in 500 g and 1 Kg packs. These two sizes let you start with a smaller amount and scale up, which matches the gradual refill method above.

Signs you have added too much or too little

Too little filling feels obvious: the bolster collapses under your weight and you feel the floor rather than support. Too much is subtler. If the bolster feels hard and unyielding, or if the cover is strained at the seams, remove some filling and redistribute it. A bolster should give slightly under pressure so it can adapt to your body.

If the cover will not close comfortably, stop adding filling. Forcing a zip or seam puts unnecessary strain on the cover, and the supplied information does not include a recommended maximum fill weight, so let the cover's fit be your guide.

When to refill rather than replace

A bolster that has lost its spring but still has a sound cover is a good candidate for refilling. The supplied product information describes spare filling as a way to give a tired bolster a new lease of life, which is the practical case for keeping a pack on hand. If the cover itself is worn or damaged, refilling alone will not solve the problem, and the supplied information does not cover cover replacement in this article.

For a bolster that is simply a little soft in one area, you may not need a full pack. Open the cover, add a small amount to the flat spot, and test again. This is gentler on your budget and avoids overfilling.

Related Articles

Customer Service
Home
Products
Cart
Profile